Manufacturers of stainless steel vessel’s customer service module Company:Hangzhou Huihe Machine Facture Co., Ltd.
Tel: +86-571-89774695
Add:  Room 1103, Yongan building, No.355 Yingbin Road, Yuhang District, Hangzhou City, China 

JMFB-80 Split Colloid Mill


JMFB-80 Split Colloid Mill can be divided into stainless steel colloid mill and half-formed stainless steel colloid mill. Split colloid mill due to motor and gear grinding separate, the heat generated in work noninterference, easy to work long hours.

Colloid mill basic principles is when fluid and semi-fluid material go through the fixed gear and moved gear which is high-speed relatively linked, can be influenced by strong shear, friction and high-frequency vibration, and be effectively crushed, emulsified, homogenized. So that precision products can be made. 


JMFB-80 Split Colloid Mill characteristics



Split colloid mill’s production complex, when production colloid mill should consider design and axial positioning, in case the motor shaft axial dynamic touch tooth wear, preferably before the motor end cover bearing, because this design of the motor rotor and shaft axial thermal expansion in motor front bearing key to rear bearing direction, to reduce the influence on grinding head clearance.

Split colloid mill also called horizontal colloid mill, Its grinding speed is higher than the motor speed, so the output the corresponding also is big, even if the same type, the same power of motor, the output of horizontal also significantly greater than the vertical.

Moreover, split colloid mill due to motor and gear grinding separately, the heat generated in work noninterference, easy to work long hours.


JMFB-80 Split Colloid Mill structure

JMFB-80 Split Colloid Mill is motor and gear grinding is packed separately, through the pulley, the belt drive, so the speed of the grinding besides is decided by motor rotate speed, also related to the two pulleys, similar to the ten-speed bicycle.

JMFB-80 Split Colloid Mill structure


JMFB-80 Split Colloid Mill usage

2. Chemical Industry: paints, lubricating oil, spices, dyes, emulsified asphalt, emulsified rubber, catalyst, paint coating etc.
3. Pharmaceutical Industry: cod liver oil, athlete cream, bee honey, pollen etc.
4. Daily Chemical Industry: shoe polish, toothpaste, cosmetics, balsam, soap, and detergent, etc
5. Other Industry: building industry, paper industry, plastic industry, battery industry, etc

JMFB-80 Split Colloid Mill classification

1, according to the structure: vertical colloid mill (JML) and split colloid mill (JMF),


2, according to the exterior: ordinary laboratory colloid mill and Stainless steel colloid mill.

JMFB-80 Split Colloid Mill technical parameters



Emulsification fineness um (single or multiple loop)
Adjusting range mm
Production t/h  According to the material properties
Power KW
Voltage V
Speed  rpm
Burrs diameter mm
Discharging mouth diameter (time)
Cooling water pipe diameter(time)
Overall size
Length  mm
Wide  mm
Height  mm
Weight  kg
1.       The parameters in the chart are standard configuration, such as customer requires otherwise, please put forward.
2.      Colloid mill selection process parameters should be provided: the material properties, motor power, production, special requirements, etc.

JMFB-80 Split Colloid Mill finished picture

JMFB-80 Split Colloid Mill finished picture

Reading this article online friend also read:


1, The difference between the vertical colloid mill and split type colloid mill

2, vertical colloid mill

3, JML-50 Laboratory colloid mill