Manufacturers of stainless steel vessel’s customer service module Company:Hangzhou Huihe Machine Facture Co., Ltd.
Tel: +86-571-89774695
Add:  Room 1103, Yongan building, No.355 Yingbin Road, Yuhang District, Hangzhou City, China 

JMFB-140 Split Colloid Mill


JMFB-140 Split Colloid Mill’s basic working principle is made by crushing grinding on mill tooth profile incline relative motion, one of the high speed rotating, another still make through tooth profile incline between material by shear force and friction force, at the same time in the high frequency vibration and the high-speed spiral complex under the action of forces, such as the material effective grinding, emulsifying, crushing, dispersion and homogeneous, and fine particle crushing effect is obtained.


JMFB-140 Split Colloid Mill characteristics


1.     Split colloid mill has reasonable structure, simple operation, low noise, easy maintenance, cover an area of an area small, corrosion resistance, wide range of uses and other characteristics;

2.     Part of this colloid mill  is made of stainless steel, corrosion resistance, non-toxic. Using the non-contact liner seal, has the leakage, maintenance free, such as better than adding water retaining plate to protect the motor. (also can be all material of stainless steel manufacturing);

3.       Grinding equipment is suitable for all kinds of fluid, fluid, homogeneous emulsion, emulsifying, mixing, grinding, etc.



JMFB-140 Split Colloid Mill structure

The main structures of colloid mill are grinding parts, the base transmission department and dedicated motor.

JMFB-80 Split Colloid Mill structure
The dynamic and still millstones in the core part and mechanical seal parts are the most key parts. Therefore, according to the different natures of the materials, the selection must be different. But the materials are all made of stainless steel.


JMFB-140 Split Colloid Mill usage


1. Food Industry: dairy products, chocolate, soy sauce, jam, peanut butter, butter and beverage;


2. Chemical Industry: paints, lubricating oil, spices, dyes, emulsified asphalt, emulsified rubber, catalyst, paint coating etc;


3. Pharmaceutical Industry: cod liver oil, athlete cream, bee honey, pollen etc;


4. Daily Chemical Industry: shoe polish, toothpaste, cosmetics, balsam, soap, and detergent, etc;


5. Other Industry: building industry, paper industry, plastic industry, battery industry, etc.


JMFB-140 Split Colloid Mill classification

1. According to Angle of Appearance: there are Ordinary Split Colloid Mill and Sanitary Split Stainless steel Colloid Mill.

JMFB-140 Split Colloid Mill technical parameters



Style No.
Emulsification fineness um (single or multiple loop)
Adjusting range mm
Production t/h  According to the material properties
Power KW
Voltage V
Speed  rpm
Burrs diameter mm
Discharging mouth diameter (time)
Cooling water pipe diameter(time)
Overall size
Length  mm
Wide  mm
Height  mm
Weight  kg
Warm note:


1.   The parameters in the chart are standard configuration, such as customer requires otherwise, please put forward.


2.   Colloid mill selection process parameters should be provided: the material properties, motor power, production, special requirements, etc.


JMFB-140 Split Colloid Mill finished picture

JMFB-140 Split Colloid Mill finished picture

Reading this article online friend also read:


1, The difference between the vertical colloid mill and split type colloid mill

2, vertical colloid mill

3, Stainless steel colloid mill